Ricoh CX6 manual Flag Function Setting, Setting/Canceling One File at a Time

Flag Function Setting

Flag images for quick access during playback. Flagged images can be displayed by pressing the Fn button.

Setting/Canceling One File at a Time

To flag or remove flag marking from the current image, select [Flag Function Setting] in single-image playback. Flagged files are indicated by an icon.

Note--------------------------------------------------------------------------------------

If an enlarged still image is set, the magnification ratio and magnified area are saved and the enlarged image can be displayed as is.

Setting/Canceling Multiple Files at One Time

To flag or remove flag marking from multiple selected images, select [Flag Function Setting] in thumbnail view, highlight images, and press the ADJ./OK button to add or remove flag marking. Press DISP. when the operation is complete.

Flag Func. Set. 9/12 4 :3 F

Finish Sel/Cancel

4 PlaybackMenu

Caution---------------------------------------------------------------------------------

•If the name of the file set to [Flag Function Setting] is changed using a computer, the file is canceled from [Flag Function Setting].

•Copying images from internal memory to a memory card removes flag marking from the images in internal memory.

•When a file in an SD memory card is set to [Flag Function Setting], [CLIPINFO] folder and CLIP.CLI file are created on the SD memory card. If these are deleted, the corresponding file is canceled from [Flag Function Setting].

•If the name of an image file is changed using a computer, the file may not be able to be set to [Flag Function Setting].

•Only images taken using this camera can be set to [Flag Function Setting].

89