Ricoh CX6 manual Pre-AF, Center, Spot

Pre-AF

If [On] is selected when [Multi AF], [Face Pr. Multi], [Subj. Tracking], [Spot AF], or [Multi-trgt AF] is selected for [Focus], the camera will continue to focus even when the shutter-release button is not pressed halfway. This may decrease the time needed to focus when a picture is taken, potentially improving shutter response.

Exposure Metering

You can change the metering method (the range to use for metering) used to determine the exposure value.

—Multi

The entire shooting range is divided into 256 partitions, and each is metered to determine the overall exposure value.

Center

The entire image is metered, with emphasis on the center, to determine the exposure value. Use this when the brightness of the center and surroundings are different.

Spot

Only the center of the image is metered to determine the exposure value. Use this setting when you want to use the brightness at the center. This is useful if there is a marked difference in contrast or backlighting.

Image Settings

You can change the picture quality of an image, including the contrast, sharpness, color and vividness.

Vivid

Take strong, vivid photos with higher contrast and sharpness and maximum vividness.

—Standard

Creates an image with normal picture quality. Cust. Settings

You can select from five [Contrast], [Sharpness], and [Vividness] levels.

Black & White

Creates a black and white picture. Sepia

Creates a sepia-toned picture.

2 ShootingMenu

69