If you are using the camera for the first time, read this section.

Loading the Rechargeable Battery and SD Memory Card

After recharging the rechargeable battery, load the battery and the SD memory card. Be sure the camera is off.

1

Open the battery/card cover.

2

 

 

 

 

 

 

 

 

 

 

Insert the rechargeable battery and SD memory card.

Make sure the SD memory card is facing the right way and then push the card all the way in until it clicks.

When the rechargeable battery is loaded in place, it is locked with the hook shown in the figure.

Logo side

 

• If the battery is not inserted in the correct orientation, the camera

 

will not turn on. Reinsert the battery in the correct orientation.

3

Close the battery/card cover and

 

slide it back into place.

 

 

 

 

 

 

 

 

 

 

Removing the Rechargeable Battery

Open the battery/card cover. Release the hook that locks the rechargeable battery. The battery is ejected. Pull the battery out of the camera. Be careful not to drop the battery when removing it from the camera.

Removing the SD Memory Card

Open the battery/card cover. Push in the SD memory card and gently

22release to eject it. Pull the card out of the camera.

Page 24
Image 24
Ricoh CX6 Loading the Rechargeable Battery and SD Memory Card, Close the battery/card cover, Removing the SD Memory Card