Ricoh Fax22 manual 15Nlmllxlm

6. ROUTINE OPERATION

– Procedure –

The display should now be as shown on the right.

FAX–1

DARKEN, HALFI’ONE and DETAIL will show

in the display if selected.

L DARKEN

8 18m

HAIHONE DETAIL

1.Enter the phone number of the remote terminal using either a:

. Quick Dial key

●Speed dial code (from 01 to 20)

●Full telephone number (keypad on panel) Only one destination can be entered.

To correct any mistakes, press the STOP key.

Quick Dial key:

1) Press the desired QUICK DIAL key (e.g., Ol)J__–– FM1

See page 40 for details on how to store-

Quick Dial keys.

L

5551212

J

2)Then press the “START/COPY” key if the keyed-in number is correct.

The message will now be transmitted.

Speed Dial code:

1) Press the SPEED DIAL key

J

2)Then enter the required two-digit speed-dial

code (e.g., 13) at the numerical keypad.

Refer to page 41 for details on how to store L Speed Dial numbers.

3)Then press the “START/COPY” key if the keyed-in number is correct.

The message will now be transmitted.

15Nl(mllxlm