Ricoh SGC 1506, LD215c, GS 106 appendix Click Next, Select the machine model you want to use

Installing the Printer Driver

F Select the printer driver you want to use in the [Select Program] dialog box. You can select several printer drivers.

G Click [Next >].

H Select the machine model you want to use.

The printer name can be changed in the [Change settings for 'Printer Name'] box.

I Double-click the printer name to display the printer settings.

The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer model, and port.

J Click [Port:], and then click [Add].

K Click [SmartDeviceMonitor], and then click [OK].

L Click [TCP/IP], and then click [Search].

A list of printers using TCP/IP appears.

M Select the printer you want to use, and then click [OK].

Only printers that respond to a broadcast from the computer appear. To use a machine not listed here, click [Specify Address], and then enter the IP address or host name of the machine.

N Check that the port of the selected printer is displayed in [Port:]. O Set a user code, if necessary.

Up to 8 numeric characters can be entered. No alphabetic character or symbol can be entered.

P Select the [Default Printer] check box to configure the printer as default. Q Click [Continue].

Installation starts.

R After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].

Restart the computer to complete installation.

Note

❒Setting a user code allows a SmartDeviceMonitor for Admin user to dis- play and check statistics about the number of sheets which each user prints. For details, see SmartDeviceMonitor for Admin Help.

❒Auto Run may not work with certain operating system settings. If this hap- pens, launch “Setup.exe” on the CD-ROM root directory.

❒Under Windows 95 / 98 / Me, you cannot add an IP address partially sim- ilar to the one already used. For example, if “192.168.0.2” is in use, “192.168.0.2xx” cannot be used. Similarly, if “192.168.0.20” is in use, “192.168.0.2” cannot be used.

1

33