Ricoh GS 106, LD215c Setting Thick Paper or Envelopes, Setting Paper Type Using the Control Panel

H Press the {User Tools/Counter} key to return to the default screen.

Note

❒If the printer driver is not used, select [Machine Settings] from [Bypass Tray Priority] in [System] of [Printer Features] (see “Printer Features”, General Set- tings Guide). Set paper size using the control panel.

Reference

For printer driver settings, see the printer driver Help.

Setting Thick Paper or Envelopes

The following procedures are not required if you select the printer driver for the settings. In that case, set the paper size using the printer driver.

Important

❒If you select [Machine Settings] from [Bypass Tray Priority] in [System] of [Printer Features] (see “Printer Features”, General Settings Guide), the settings made using the control panel have priority over the printer driver settings.

❒Do not load OHP transparencies onto the bypass tray. Use the One Sheet By- pass tray.

Setting Paper Type Using the Control Panel

A Press the {User Tools/Counter} key.

AMO601S

B Select [System Settings] using {T} or {U}, and then press the {OK} key.

C Select [Tray Paper Settings] using {T} or {U}, and then press the {OK} key.

14