BenQ SH960 user manual Lamp information, Getting to know the lamp hour, Extending lamp life

English

Lamp information

Getting to know the lamp hour

When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer.

To obtain the lamp hour information:

1.Press MENU/EXIT and then press / until the Advanced Setup menu is highlighted.

2.Press to highlight Lamp Settings and press ENTER. The Lamp Settings page is displayed.

3.The lamp hour information is shown in the row of Equivalent Lamp Hour #1/Equivalent Lamp Hour #2.

4.To leave the menu, press MENU/EXIT.

Extending lamp life

The projection lamp is a consumable item. To keep the lamp life as long as possible, you can do the following settings via the OSD menu.

Advanced Setup

Lamp Settings	ENTER
HDMI Settings
Baud Rate	115200
High Altitude Mode	Off
Audio Settings
Password
Lan Control Settings
Reset All Settings
Direct Power On	Off
Signal Power On	Off
Expert Mode
S-Video	EXIT Back

Lamp Settings

Lamp Mode	Dual-Reliable
Reset Lamp Timer 1
Reset Lamp Timer 2
Equivalent Lamp Hour #1	50 hours
Equivalent Lamp Hour #2	50 hours
	EXIT Back

•Setting Lamp Mode as Dual-Reliable

Using Dual-Reliablemode reduces system noise and power consumption. If the Dual-Reliablemode is selected, the light output will be reduced and result in darker projected pictures.

Setting the projector in Dual-Reliablemode also extends the lamp life. To set Dual-Reliablemode, go to the Advanced Setup > Lamp Settings > Lamp Mode menu and press / .

• Setting Auto Power Off

This function allows the projector to turn off automatically if no input	System Setup
	Language	English
source is detected after a set period of time.	Splash Screen	BenQ
	Projector Position	Floor Front
	Auto Power Off	Disable
To set Auto Power Off, go to the System Setup > Auto Power Off menu and	Sleep Timer	Disable
	Menu Settings
press / to select a time period. The time period can be set from 5 to 30	Background Color	Blue
	Quick Auto Search	On
minutes in 5-minute increments. If the preset time lengths are not suitable	Input Source
	Standby Monitor Out	Off
for your presentation, select Disable. The projector will not automatically	Closed Caption
	S-Video	EXIT Back
shut down in a certain time period.

52 Additional information