English

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have made a correct connection to the projector audio input. See "Connecting with video equipment" on page 17 for how the audio input is connected.

Muting the sound

To temporarily turn off the sound:

1.Press MENU/EXIT to open the OSD menu and press / to highlight the Advanced Setup menu.

2.Press to highlight Audio Settings and press ENTER. The Audio Settings page is displayed.

3.Highlight Mute and press / to select On.

If available, you can also press MUTE on the remote control to toggle projector audio between on and off.

Adjusting the sound level

To adjust the sound level, press VOLUME+/VOLUME- on the remote control, or:

1.Repeat steps 1-2above.

2.Press to highlight Volume and press / to select a desired sound level.

Turning off the Power On/Off Ring Tone

To turn off the ring tone:

1.Repeat steps 1-2above.

2.Press to highlight Power On/Off Ring Tone and press / to select Off.

The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power On/Off Ring Tone.

Setting the lamp mode

This projector is capable of dual-lamp projection and provides several lamp modes for different purposes:

Lamp mode

 

User Benefit

Suitable environment

Dual-Brightest

• Delivering super-bright and clear images

Large, well lit meeting

Suitable for high-ambient-light environments

(Two lamps are used in normal

Allowing continuous and non-stop operation

rooms or auditoriums

mode)

 

under critical situations

 

 

 

 

 

 

 

 

Dual-Reliable

Extending the lamp life

Mid-large boardrooms

(Two lamps are used in

Allowing continuous and non-stop operation

economic mode)

 

under critical situations

 

 

 

 

 

Single-Alternative

 

 

 

(The lamp with shorter operating

Extending the total operation time

Normal sized rooms

hours is selected automatically

Reducing lamp replacement frequency

 

and used in normal mode)

 

 

 

 

 

 

 

Single-Eco

Extending the lamp life

 

(The lamp with shorter operating

Small to normal sized

hours is selected automatically

• Extending the total operation time

rooms

• Reducing lamp replacement frequency

and used in economic mode)

 

 

 

 

 

 

 

 

You can perform the following steps to choose a lamp mode according to your preference.

1.Press MENU/EXIT and then press / until the Advanced Setup menu is highlighted.

2.Press to highlight Lamp Settings and press ENTER.

3.Press to highlight Lamp Mode and press ENTER.

4.Press to highlight your preferred lamp mode and press ENTER.

5.A confirmation message displays. Highlight Yes and press ENTER.

36 Using the projector

Page 36
Image 36
BenQ SH960 Setting the lamp mode, Muting the sound, Adjusting the sound level, Turning off the Power On/Off Ring Tone