BenQ SH960 Using the preset and user modes

Using the projector

English

Using the preset and user modes

Selecting a preset mode

The projector is preset with several pre-defined picture modes so that you can choose one to suit your

operating environment and input source picture type.

To select a picture mode that suits your need:

• Press MODE repeatedly until your desired mode is selected.

• Using the OSD menu

1. Press MENU/EXIT and then press / until the Picture -- Basic

menu is highlighted.

2. Press to highlight Picture Mode.

3. Press / until your desired mode is selected.

These modes consist of preset values suitable for various projection

situations as described below:

• Cinema: Is appropriate for playing colorful movies, video clips from

digital cameras or DVs through the PC input for best viewing in a

blackened (little light) environment.

• Dynamic: Maximizes the brightness of the projected image. This mode is suitable for environments

where extra-high brightness is required, such as using the projector in well lit rooms.

• Presentation: Is designed for presentations. The brightness is emphasized in this mode to match PC

and notebook coloring.

• sRGB: Maximizes the purity of RGB colors to provide true-to-life images regardless of brightness

setting. It is most suitable for viewing photos taken with an sRGB compatible and properly calibrated

camera, and for viewing PC graphic and drawing applications such as AutoCAD.

• User 1/User 2: Recalls the customized settings. See "Setting the User 1/User 2 mode" on page 28 for

details.

Fine-tuning the selected picture mode

The pre-defined picture mode settings can be altered via the available items shown in the Picture -- Basic

and Picture -- Advanced menus.

To fine-tune the picture mode:

1. Press MENU/EXIT and then press / until the Picture -- Basic or Picture -- Advanced menu is

highlighted.

2. Press to highlight the item you want to adjust and press / to set your desired value. Your

selection is automatically stored in the projector and associated with that input source.

See "Fine-tuning the picture quality" on page 29 and "Advanced picture quality controls" on page 30 for

details.

Each time you change the picture mode, the projector also changes the setting to the one which was last set

for that particular picture mode on that particular input. If you change the input source, the most recently

used picture mode and settings for that input and resolution will be restored.

Picture Mode

Load Settings From

Brightness

Contrast

Tint

Sharpness

Reset Picture Settings

Rename User Mode

Picture -- Basic

+50

S-Video

Cinema

EXIT Back

Color

+50

+ 3