Ricoh GS 106, LD215c, SGC 1506 appendix Printing a Hold Print File, 101

Printing from the Print Job Screen

Hold Print

Use this function to temporarily hold a file in the machine, and print it from the computer or the machine's control panel later.

Important

❒A Hold Print file cannot be stored if:

•the total number of Sample Print, Locked Print, Hold Print, and Stored Print files in the machine is over 100. (The maximum number varies de- pending on the volume of data in files.)

• the file contains over 1,000 pages. 3

•sent or stored files in the machine contain over 9,000 pages in total.

•using the machine with no Function Upgrade Option type C1500 installed.

Note

❒If a Hold Print file has not been stored properly, check the error log on the control panel (see p.116 “Checking the Error Log”).

❒Even after you turn off the machine, stored documents in the machine re- main. However, the [Auto Delete Temporary Jobs] or [Auto Delete Stored Jobs] set- tings are applied first (see “Printer Features”, General Settings Guide).

❒If the application has a collate option, make sure it is not selected before send- ing a print job. By default, Hold Print jobs are automatically collated by the printer driver. If a collate option is selected from the application's Print dialog box, more prints than intended may be produced.

❒The files sent to the machine is not saved if you use the machine with no Func- tion Upgrade Option type C1500 installed.

Printing a Hold Print File

The following procedure describes how to print a Hold Print file with the PCL 6

/5c and the RPCS printer driver. For information about how to print a Hold Print file with the PostScript 3 printer driver, see Postscript 3 Supplement.

Important

❒Applications with their own drivers, such as PageMaker, do not support this function.

❒If you are using Mac OS X, you need Mac OS X v10.2 or higher to use this function.

A Configure Hold Print in the printer driver’s properties.

For details about configuring the printer drivers, see the relevant Help files.

B Click [Details...], and then enter a User ID in the [User ID:] box.

You can also set a file name. The file name you set will be displayed on the machine's Job List screen.

101