Operating Instructions Administrator Reference
119
*1 The "Sample Print" menu and the "Locked Print" menu appear only when the option al Print er Hard Disk
is installed.
*2 The “HDD Format” and the "Spool Printing" menu appears only when the optional Printer Hard Disk is
installed.
*3 ROM Update is not currently used.
*4 The "WL.LAN Signal" menu appears only when "IEEE 802.11b" is selected in "LAN Type" in the Host
Interface menu.
*5 While the printer is On Line, press the {
{{
{Enter #}
}}
} key, and then press the {
{{
{Escape}
}}
} key, finally press the
{
{{
{Menu}
}}
} key. You can access the "Menu Protect", "Series Prnt.Job" "Letterhead Mode", "E.Saver2
OnOff", "USB Setting" on the panel display.
*6 The “Duplex” menu appears only when the optional AD440 is installed.
*7 The “Network Setup” menu appears only when the optional Network Interface Unit or 802.11b I nterface
Unit is installed.
*8 The “IEEE 1394 Setup” menu appears only when the optional 1394 Interface Unit is installed.
*9 The “IEEE 802.11b” menu appears only when the optional 802.11b Interface Unit is installed.
PCL Menu ⇒ p.171 Orientation
Form Lines
Font Source
Font Number
Point Size
Font Pitch
Symbol Set
Ext. A4 Width
Append CR to LF
Language ⇒ p.177
Category Function Menu