Operating Instructions Administrator Reference
73
APress the {
{{
{U
UU
U}
}}
} or {
{{
{T
TT
T}
}}
} key to display "Active Protocol", and then press the {
{{
{Enter #}
}}
} key.
BPress the {
{{
{U
UU
U}
}}
} or {
{{
{T
TT
T}
}}
} key to display "NetWare".
CPress the {
{{
{Enter #}
}}
} key.
The current setting appears on the panel display.
GGGGSelect the frame type for NetWare.
Select one of the following items if necessary.
•Auto (Default)
•Ethernet 802.3
•Ethernet 802.2
•Ethernet ll
•Ethernet SNAP
Note
❒In most situations, use the default setting ("Auto "). When you first select "Au to ", the frame type
first detected by the printer is adopted. If the network can use more tha n two frame t ypes, the
printer may fail to select the correct frame type if "Auto " is selected. In this case, select the ap-
propriate frame type.