Operating Instructions Administrator Reference
192
❖
❖❖
❖Display
Shows the SNMP information and available protocols.
msh> snmp ?
msh> snmp [-p] [registered_number]
Note
❒If the -p option is added, you can view the settings one by one.
❒Omitting the number displays all access settings.
❖
❖❖
❖Community name configuration
You can set the community name of the Network Interface Board.
msh> snmp number name community_name
Note
❒The community name must be within 15 characters.
❖
❖❖
❖Access type configuration
You can select the access type from those listed below.
msh> snmp number type access_type
Access type Type of access which is permitted
read Read only
write Read and write
trap User is notified of trap messages.
no All access is denied.