Operating Instructions Administrator Reference
195
❖
❖❖
❖Configuring IPP user authorization
Use the following command:
msh> ipp user
The following message appears.
msh> Input user number (1 to 10):
Type the number, user name and password.
msh> IPP user name:user1 msh> IPP password:*******
After configuring the settings, the following message appears.
User configuration changed.
SPRINT
To make setting for IEEE 1394 (SCSI print), use the sprint command.
❖
❖❖
❖View settings
The IEEE 1394 (SCSI print) settings are displayed.
msh> sprint
❖
❖❖
❖Bidirectional configuration for the IEEE 1394 (SCSI print)
Use this setting to configure whether the IEEE 1394 (SCSI print) is bidirectional.
The factory default is "on".
msh> sprint bidi [on/off]