Operating Instructions Administrator Reference
191
Reference
For more information about the meaning of the data returned wi th this c omm and , see p .214 “Con-
figuring the Network Interface Board”.
System log information
Use the syslog command to display informa tion stored in the printer's system log.

msh> syslog

Reference
For more information about the displayed information, see p.219 “System Log Information”.
SNMP
Use the snmp command to display and edit SNMP configuration settings such as the communi ty name.
Note
❒You can configure from ten SNMP access settings numbered 1–10.
❒Default access settings 1 and 2 are as follows:
Number 1 2
Community name public admin
IP address 0.0.0.0 0.0.0.0
Access type read-only
trap off
read-write
trap off