Operating Instructions Administrator Reference
81
CFrom the [Print Server Information] menu, select [Print Server Configuration].
DFrom the [Print Server Configuration] menu, select [Printer Configuration].
ESelect the printer which is indicated as "N ot Installed".
Important
❒Use the same number as that specified as Remote Printer No. using the NIB Setup Tool.
(Step F - D).
FIf you change the name of the printer, type a new name.
A name "Printer x" is assigned to the printer. The “x” stands for the number of the selected print-
er.
GAs type, select [Remote Parallel, LPT1].
The IRQ, Buffer size, Starting form, and Queue service mode are automatically configured.
HPress the {
{{
{ESC}
}}
} key, and then click [Yes] in the confirmation dialog box.
IPress the {
{{
{ESC}
}}
} key to return to [Print Server Configuration Menu].
KKK
KAssign print queues to the created printer as follows:
AFrom [Print Server Configuration Menu], select [Queues Serviced By Printer].
BSelect the printer created in step J.
CPress the {
{{
{INSERT}
}}
} key to select a queue serviced by the printer.
Note
❒You can select more than one queue at a time.
DFollow the instructions on the screen to make other necessary settings.
When you have finished the above steps, confirm that the queues are assigned.
LLL
LPress the {
{{
{ESC}
}}
} key until "Exit?" appears, and then select [Yes] to exit PCONSOLE.