Operating Instructions Administrator Reference
181
Spool Printing
With Spool Printing, the whole data of a print job is saved in the Printer Ha rd Di sk bef ore printing. To
use this function, set it from the menu. Se e p.149 System Menu.
Important
Do not turn off the printer or the computer when a print job is b eing spooled and the Data In indicator
is blinking. If you do, the print job will remain in the Printer H ard Disk and be printed when the printer
is turned on.
Limitation
Spool Printing does not appear unless the optional Printer Hard Dis k is installed.
Data that has been received in the protocol other than LPD or IPP cannot be spo oled.
Up to 50 jobs (approximately 1000 MB) can be spooled at a time.
When Spool Printing is on, the size of a single print job cannot excee d 500 MB.
When sending spooled print jobs from more than one computer at the same time, up to five LPR
jobs and one IPP job can be spooled. Jobs exceeding the maxi mum number ca nnot be spooled.
Wait until the number of spooled print jobs falls below the maximum.
Note
When "On" is selected, the first print will take time.
Note
Spool jobs stored in the machine can be viewed or deleted using a Web browser.