Copying
Programs
You can store the frequently used copy job settings in the machine memory and recall them for future use.
You can store up to 10 programs.
Note
2 ❒ When a specified program is registered as the default, its values become the default settings, which are displayed without pressing the {Program} key, when modes are cleared or reset, and after the operation switch is turned on. See “Programming Defaults in Initial Display”.
❒Paper settings are stored based on paper size. So if you place more than one paper tray of the same size, the paper tray prioritized with User Tools (Sys- tem Settings) will be selected first. See “Tray Paper Settings”, General Settings Guide.
❒Programs are not deleted by turning the power off or by pressing the {Clear Modes} key.
Reference
See p.146 “Programming Defaults in Initial Display”.
See “Tray Paper Settings”, General Settings Guide.
142