Copying
F Press [OK].
The screen returns to the program screen, showing the program number followed by the program name. The screen returns to the initial copy display after a short time.
Note
❒Program numbers with m against them already have settings made for
2 them.
Changing a Stored Program
Changes program settings.
A Check the program settings.
B Set the contents of a program.
C Press the {Program} key.
D Press [Program].
E Press the program number you want to change.
F Press [Yes].
G Enter the program name.
You can enter up to 34 characters.
H Press [OK].
The screen returns to the program screen, showing the program number followed by the program name. The screen returns to the initial copy display after a short time.
Note
❒When you want to check the contents of a program, recall the program.
❒When it is overwritten, the previous program is deleted.
Reference
144