Copier Functions
Note
❒If you press [Suspend] after checking the results, return to step A to adjust
the copy settings as necessary. You can change the settings for Staple, Punch, Duplex (1 sided → 2 sided, 2 sided → 2 sided), Copy Orientation, Margin Adjust., Cover/Slip Sheet, Stamp, and Designate. However, de- pending on the combination of functions, you may not be able to change some settings.
Reference | 2 |
See p.171 “Function Compatibility”.
Changing the number of sets
You can change the number of copy sets during copying.
Important
❒This function can only be used when the Sort function is turned on.
A While “Copying...” is displayed, press the {Clear/Stop} key.
B Press [Change Quantity].
C Enter the number of copy sets with the number keys, and then press the {q} key.
D Press [Continue].
Copying starts again.
Note
❒The number of sets you can enter in step C differs depending on when the {Clear/Stop} key is pressed.
75