Copying

C Place your originals, and then press the {Start} key.

Reference

See p.14 “Sizes difficult to detect”.

Size Magnification

2 This function calculates an enlargement or reduction ratio based on the lengths of the original and copy.

ANP059S

Measure and specify the lengths of the original and copy by comparing “A” with “a”.

A Press [Reduce / Enlarge].

B Press [Size Magnification].

C Enter the length of the original with the number keys, and then press the {q}key. You can enter sizes between 1 to 999 mm in 1 mm steps.

D Enter the length of the copy with the number keys, and then press the {q}key.

E Press [OK] twice.

F Place the originals, and then press the {Start} key.

Note

❒To change the length after pressing the {q} key in step D, select [Original] or [Copy], and then enter the desired length.

68