Document Server
Changing number of print copies while printing is in progress
Following describes the procedure for changing the number of print copies after printing is started.
Important
❒This feature is enabled when the sort function is selected in the printing conditions.
A Press the {Clear/Stop} key.
B Press [Change Quantity].
3C Enter the number of print copies anew from the number keys.
D Press the {q} key.
E Press [Continue].
Printing will be resumed.
Note
❒The range of print copies enterable in step C depends on the timing of your pressing the {Clear/Stop} key.
Sample Print
When print copies are massive, you can print a single copy in advance to check appropriateness of the printing order of the selected documents and the printing conditions.
Important
❒This feature is enabled when the sort function is selected in the printing conditions.
A
B
Select the document to be printed.
When a password is set, enter it and then press [OK].
Press the {Sample Copy} key.
Only one copy will be printed.
C Press [Continue].
Printing will be resumed.
164