
Appendix
❖ Duplex
• You can use the following copy paper with this function:
A3L, B4 JISL, A4KL, B5 JISKL, A5K, 11" ⋅ 17"L, 81/2" ⋅ 14"L,
81/4" ⋅ 14"L, 81/2" ⋅ 11"KL, 71/4" ⋅ 101/2"KL, 8" ⋅ 13"L, 81/2" ⋅ 13"L, 81/4" ⋅ 13"L, 11" ⋅ 15"L, 10" ⋅ 14"L, 8" ⋅ 10"L, 8KL, 16KKL
| • You cannot use the following copy paper with this function: | ||
| • Paper smaller than A5, 51/2" ⋅ 81/2" | ||
| • | Translucent paper | |
| • Label paper (adhesive labels) | ||
| • | OHP transparencies | |
| • Paper thicker than 105 g/m2, 28 lb. | ||
| • Paper thinner than 64 g/m2, 17 lb. | ||
4 | |||
• | Postcards | ||
|
•When an odd number of originals are placed in the ADF, the back of the last page of copied paper is blank.
•During copying, the image is shifted to allow for the binding margin.
❖Combine
•In this mode, the machine selects the reproduction ratio automatically. This reproduction ratio depends on copy paper sizes and the number of originals.
•The reproduction ratios you can specify are
•If the calculated ratio is under the minimum ratio, it is automatically ad- justed to within available range. However, with some ratios, parts of the image might not be copied.
•You cannot use custom size paper.
•If the orientation of originals is different from that of the copy paper, the machine will automatically rotate the image by 90° to make copies properly.
•If the number of originals placed is less than the number specified for com- bining, the last page segment is left blank as shown.
180