Copying

Note

❒Always log off when you have finished using the machine to prevent un- authorized users from using the machine.

❒To stop the machine during a multi-copy run, press the {Clear/Stop} key.

❒To cancel all copy jobs and return the machine to the default condition, press the {Clear Modes} key.

2

❒ To clear entered values, press the {Clear/Stop}key or [Cancel] on the screen.

❒To confirm settings, press the [Check Modes].

Interrupt Copy

Use this function if you want to interrupt a long copy job to make urgently needed copies.

Important

❒You cannot use the Interrupt Copy function when fax originals are being scanned or the scanner function is being used.

A Press the {Interrupt} key.

AQI058S

B The machine stops scanning. Remove the originals that were being copied. C Place the originals you want to copy.

D Press the {Start} key.

E F

G

The machine starts making copies.

When copying is complete, remove the originals and copies. Press the {Interrupt} key again.

The interrupt key indicator goes off.

Replace the originals that you were copying, and then press the {Start}key.

Following message “Reset n original(s).”, replace the originals that you were copying.

Note

❒The previous copy job settings are restored. Simply press the {Start}key to

26continue copying from where it left off.