
Supplementary Information
❖Booklet/Magazine
•The machine sets the reproduction ratio automatically to meet the paper size and copies the originals together onto the paper.
•The reproduction ratios you can specify are
•If the calculated ratio is under the minimum ratio, it is automatically ad- justed to within available range. However, with some ratios, parts of the image might not be copied.
•If the orientation of originals is different from that of the copy paper, the machine will automatically rotate the image by 90° to make copies properly.
•You cannot copy with originals different in size and orientation.
•If the number of originals scanned is less than a multiple of 4, the last page
| is copied blank. |
|
| |
|
| 4 | ||
• In Magazine mode, the copying may take some time after scanning originals. |
| |||
|
| |||
• When the optional Booklet Finisher SR3020 is installed, if you select [Staple: |
|
| ||
| Centre] in Magazine mode, the machine staples and folds the paper in the |
|
| |
| centre, then delivers the paper folded. |
|
| |
❖ Image Repeat |
|
| ||
• | Depending on the paper size, ratio, and orientation, parts of repeated im- |
|
| |
| ages may not be copied. |
|
| |
❖ Centring |
|
| ||
• Though the original is set to a different orientation from the paper loaded, |
|
| ||
| the machine will not rotate the image by 90° (Rotate copy). |
|
| |
❖ Erase |
|
|
| |
• The width of the erased margin varies depending on the reproduction ratio. |
|
| ||
• If the size of the original is different from sizes listed in the following chart, |
|
| ||
| the erased margin might be shifted: |
|
| |
| • | Metric version |
|
|
|
| Exposure glass : A3L, B4 JISL, A4KL, B5 JISKL |
|
|
|
| ADF : A3L, B4 JISL, A4KL, B5 JISKL, A5KL |
|
|
| • | Inch version |
|
|
|
| Exposure glass: 11" ⋅ 17"L, 81/2" ⋅ 14"L, 81/2" ⋅ 11"KL |
|
|
|
| ADF: 11"⋅17"L, 81/2" ⋅ 14"L, 81/2" ⋅ 11"KL, 5/2" ⋅ 81/2"L |
|
|
❖ Background Numbering |
|
| ||
• The numbers appear to overlap the copied image in some cases. |
|
| ||
❖ Margin Adjustment |
|
| ||
• | If you set a binding margin that is too wide, part of the image may not be |
|
| |
| copied. |
|
| |
• | When making copies in Combine mode, the binding margin is added to |
|
| |
| the copies after the combination is finished. | 181 |
| |
|
|
|
|