Placing Originals
A Press [Special Original].
1
B Select the original orientation (
or 
), and then press [OK].
Note
❒It is recommended to use this function together with the [Auto Paper Select] or [Auto Reduce / Enlarge] function.
Placing Originals on the Exposure Glass
Place originals on the exposure glass.
Important
❒Do not lift the exposure glass cover or ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
A Lift the exposure glass cover or ADF.
Be sure to lift the exposure glass cover or ADF by more than 30 degrees. Oth- erwise, the size of the original might not be detected correctly.
B Place the original face down on the exposure glass. The original should be aligned to the rear left corner.
Start with the first page to be copied.
AQH010S
APositioning mark
BLeft scale
C Lower the exposure glass cover or ADF.
17