Sending Scan Files to Folders

Sending Files to an FTP Server

This section explains how to specify destinations when sending files to an FTP server.

2

Entering the path to an FTP server manually

You can enter the path to an FTP server manually.

A Press [Manual Entry].

B Press [FTP].C Press [Manual Entry] on the right side of the server name field.

The soft keyboard appears.

D Enter a server name.

Instead of specifying the destination using its path, you can also use its IPv4 address.

E F

Press [Manual Entry] on the right side of the path field.Enter the path for the folder.

The following is an example of a path where the folder name is “user” and the subfolder name is “lib”: user\lib.

G H

I

Press [OK].

Enter the user name according to the setting at the destination.

Press [Manual Entry] to the right of the user name field to display the soft key- board.

Enter the password according to the setting at the destination.

Press [Manual Entry] next to the password field to make the soft keyboard ap- pear.

54