Rinnai RL94I, RL75I Recommended Piping for Basic Installation, Rinnai Water Heater

Recommended Piping for Basic Installation

Rinnai

Water Heater

Rinnai
Equipment List		QTY
Rinnai
Water Heaters		1
RIK-KIT (Optional)		1
(3/4" Fittings Include:
2	Unions, 2 Ball Valves,
2	Drain Valves and
1	Pressure Relief Valve.)

3/4" Gas Connection

3/4" Hot Water Supply Line
For Building Fixtures
	KEY
3/4" Ball Valve	Pressure Regulator
3/4" Union	Circulating Pump
Check Valve	Boiler Drain Valve
Pressure Relief Valve	S Solenoid Valve

Gas Supply

3/4" Cold Water Supply Line

This is not an engineered drawing. It is intended only as a guide and not as a replacement for professionally engineered project drawings. This drawing is not intended to describe a complete system. It is up to the contractor/engineer to determine the necessary components and configuration of the particular system being installed. This drawing does not imply compliance with local building code requirements. It is the responsibility of the contractor/engineer to ensure installation is in accordance with all local building codes. Confer with local building officials before installation.

24 VB Series Indoor LS Manual