MIDI Implementation
19
●0110: Overdrive
Creates a soft distortion similar to that produced by vacuum tube ampli ers.
No Parameter Value Description
1Drive 0–127 0–127 Degree of distortion
Also changes the volume.
2Amp Type #1 0–3
Small,
Built-In,
2-Stack,
3-Stack
Type of guitar amp
Small: small amp
Built-In: single-unit type amp
2-Stack: large double stack
amp
3-Stack: large triple stack amp
3Low Gain 0–30 -15–+15 dB Gain of the low range
4High Gain 0–30 -15–+15 dB Gain of the high range
5Pan 0–127 L64–63R Stereo location of the output
sound
6Level #2 0–127 0–127 Output Level
●0111: Distortion
Produces a more intense distortion than Overdrive. The parameters are the same as
for “Overdrive.”
●0112: Overdrive2
This is an overdrive that provides heavy distortion.
No Parameter Value Description
1Drive 0–127 0–127 Degree of distortion
Also changes the volume.
2Tone 0–127 0–127 Sound quality of the Overdrive
e ect
3Amp Sw 0–1 O , On Turns the Amp Simulator
on/o .
4Amp Type #1 0–3
Small, Built-
In, 2-Stack,
3-Stack
Type of guitar amp
Small: small amp
Built-In: single-unit type amp
2-Stack: large double stack
amp
3-Stack: large triple stack amp
5Low Gain 0–30 -15–+15 dB Gain of the low range
6High Gain 0–30 -15–+15 dB Gain of the high range
7Pan 0–127 L64–63R Stereo location of the output
sound
8Level #2 0–127 0–127 Output Level
●0113: Distortion2
This is a distortion e ect that provides heavy distortion. The parameters are the same
as for “Overdrive2.”
●0107: Speaker Simulator
Simulates the speaker type and mic settings used to record the speaker sound.
No Parameter Value Description
1Speaker Type
#1 0–15 (See the
table.) Type of speaker
2Mic Setting 0–2 1, 2, 3
Adjusts the location of the mic
that is recording the sound of
the speaker.
This can be adjusted in three
steps, with the mic becoming
more distant in the order of 1,
2, and 3.
3Mic Level 0–127 0–127 Volume of the microphone
4Direct Level 0–127 0–127 Volume of the direct sound
5Level #2 0–127 0–127 Output Level

❍ Speci cations of each Speaker Type

The speaker column indicates the diameter of each speaker unit (in inches) and the
number of units.
Type Cabinet Speaker Microphone
Small 1 Small open-back enclosure 10 Dynamic
Small 2 Small open-back enclosure 10 Dynamic
Middle Open back enclosure 12 x 1 Dynamic
JC-120 Open back enclosure 12 x 2 Dynamic
Built-In 1 Open back enclosure 12 x 2 Dynamic
Built-In 2 Open back enclosure 12 x 2 Condenser
Built-In 3 Open back enclosure 12 x 2 Condenser
Built-In 4 Open back enclosure 12 x 2 Condenser
Built-In 5 Open back enclosure 12 x 2 Condenser
BG Stack 1 Sealed enclosure 12 x 2 Condenser
BG Stack 2 Large sealed enclosure 12 x 2 Condenser
MS Stack 1 Large sealed enclosure 12 x 4 Condenser
MS Stack 2 Large sealed enclosure 12 x 4 Condenser
Metal Stack Large double stack 12 x 4 Condenser
2-Stack Large double stack 12 x 4 Condenser
3-Stack Large triple stack 12 x 4 Condenser