MIDI Implementation
31
●0156: Gate Reverb
This is a special type of reverb in which the reverberant sound is cut o before its
natural length.
No Parameter Value Description
1Type #1 0–3
Normal,
Reverse,
Sweep1,
Sweep2
Type of reverb
Normal: conventional gated
reverb
Reverse: backwards reverb
Sweep1: the reverberant
sound moves from right to left
Sweep2: the reverberant
sound moves from left to right
2Pre Delay 0–125 0.0–100.0 ms
Adjusts the delay time from
the direct sound until the
reverb sound is heard.
3Gate Time 0–99 5–500 ms
Adjusts the time from when
the reverb is heard until it
disappears.
4Low Gain 0–30 -15–+15 dB Gain of the low range
5High Gain 0–30 -15–+15 dB Gain of the high range
6Balance #2 0–100 D100:0W–
D0:100W
Volume balance between
the direct sound (D) and the
reverb sound (W)
7Level 0–127 0–127 Output Level
●0200: Overdrive Chorus
This e ect connects an overdrive and a chorus in series.
No Parameter Value Description
1Overdrive
Drive 0–127 0–127 Degree of distortion
Also changes the volume.
2Overdrive
Pan 0–127 L64–63R Stereo location of the
overdrive sound
3Chorus Pre
Delay 0–125 0.0–100.0 ms
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
4Chorus Rate
Mode 0–1 Hz, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
5Chorus Rate
#1 1–127 0.05–10.00
Hz Frequency of modulation (Hz)
6Chorus Rate 0–21 note Frequency of modulation
(note)
7Chorus
Depth 0–127 0–127 Depth of modulation
8Chorus
Balance #2 0–100 D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the chorus (W)
and the sound that is not sent
through the chorus (D).
9Level 0–127 0–127 Output Level
●0201: Overdrive Flanger
This e ect connects an overdrive and a  anger in series.
No Parameter Value Description
1Overdrive
Drive 0–127 0–127 Degree of distortion
Also changes the volume.
2Overdrive
Pan 0–127 L64–63R Stereo location of the
overdrive sound
3Flanger Pre
Delay 0–125 0.0–100.0 ms
Adjusts the delay time from
when the direct sound begins
until the  anger sound is
heard.
4Flanger Rate
Mode 0–1 Hz, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
5Flanger Rate
#1 1–127 0.05–10.00
Hz Frequency of modulation (Hz)
No Parameter Value Description
6Flanger Rate 0–21 note Frequency of modulation
(note)
7Flanger
Depth 0–127 0–127 Depth of modulation
8Flanger
Feedback 0–98 -98–+98%
Adjusts the proportion of the
anger sound that is fed back
into the e ect. Negative (-)
settings will invert the phase.
9Flanger
Balance #2 0–100 D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the  anger (W)
and the sound that is not sent
through the  anger (D).
10 Level 0–127 0–127 Output Level
●0202: Overdrive Delay
This e ect connects an overdrive and a delay in series.
No Parameter Value Description
1Overdrive
Drive #1 0–127 0–127 Degree of distortion
Also changes the volume.
2Overdrive
Pan 0–127 L64–63R Stereo location of the
overdrive sound
3Delay Mode 0–1 ms, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
4Delay Time 0–127 1–2540 ms
Adjusts the delay time from
the direct sound until the
delay sound is heard. (ms)
5Delay Time 0–21 note
Adjusts the delay time from
the direct sound until the
delay sound is heard. (note)
6Delay
Feedback 49–89 0–+80%
Adjusts the proportion of the
delay sound that is fed back
into the e ect.
7Delay HF
Damp 0–17 200–8000 Hz,
Bypass
Adjusts the frequency above
which sound fed back to
the e ect will be cut. If you
do not want to cut the high
frequencies, set this parameter
to Bypass.
8Delay
Balance #2 0–100 D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the delay (W)
and the sound that is not sent
through the delay (D).
9Level 0–127 0–127 Output Level
●0203: Distortion Chorus
The parameters are essentially the same as in “Overdrive Chorus,” with the
exception of the following two.
Overdrive Drive Distortion Drive
Overdrive Pan Distortion Pan
●0204: Distortion Flanger
The parameters are essentially the same as in “Overdrive Flanger,” with the
exception of the following two.
Overdrive Drive Distortion Drive
Overdrive Pan Distortion Pan
●0205: Distortion Delay
The parameters are essentially the same as in “Overdrive Delay,” with the exception
of the following two.
Overdrive Drive Distortion Drive
Overdrive Pan Distortion Pan