MIDI Implementation
28
●015e: Stereo Delay4
This is a stereo delay.
No Parameter Value Description
1Delay Left
Mode 0–1 ms, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
2Delay Left 0–127 1–1270 ms Adjusts the time until the
delay sound is heard. (Hz)
3Delay Left 0–21 note Adjusts the time until the
delay sound is heard. (note)
4Delay Right
Mode 0–1 ms, note Settings of the Delay Right
The parameters are the same
as for the Delay Left.
5Delay Right 0–127 1–1270 ms
6Delay Right 0–21 note
7Phase Left 0–1 Normal,
Inverse Phase of the delay sound
8Phase Right 0–1
9Feedback
Mode 0–1 Normal,
Cross
Selects the way in which delay
sound is fed back into the
e ect. (See the  gures above.)
10 Feedback #1 49–89 0–+80%
Adjusts the amount of the
delay sound that’s fed back
into the e ect.
11 HF Damp 0–17 200–8000 Hz,
Bypass
Adjusts the frequency above
which sound fed back to the
e ect is  ltered out. If you
don’t want to  lter out any
high frequencies, set this
parameter to Bypass.
12 Low Gain 0-30 -15–+15 dB Gain of the low frequency
range
13 High Gain 0-30 -15–+15 dB Gain of the high frequency
range
14 Balance #2 0-100 D100:0W–
D0:100W
Volume balance between the
direct sound (D) and the delay
sound (W)
15 Level 0-127 0–127 Output level
●015f: Stereo Delay5
This is a stereo delay.
No Parameter Value Description
1Delay Left
Mode 0–1 ms, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
2Delay Left 0–127 1–1270 ms Adjusts the time until the
delay sound is heard. (Hz)
3Delay Left 0–21 note Adjusts the time until the
delay sound is heard. (note)
4Delay Right
Mode 0–1 ms, note Settings of the Delay Right
The parameters are the same
as for the Delay Left.
5Delay Right 0–127 1–1270 ms
6Delay Right 0–21 note
7Phase Left 0–1 Normal,
Inverse Phase of the delay sound
8Phase Right 0–1
9Feedback
Mode 0–1 Normal,
Cross
Selects the way in which delay
sound is fed back into the
e ect. (See the  gures above.)
10 Feedback #1 49–89 0–+80%
Adjusts the amount of the
delay sound that’s fed back
into the e ect.
11 HF Damp 0–17 200–8000 Hz,
Bypass
Adjusts the frequency above
which sound fed back to the
e ect is  ltered out. If you
don’t want to  lter out any
high frequencies, set this
parameter to Bypass.
12 Low Gain 0–30 -15–+15 dB Gain of the low frequency
range
No Parameter Value Description
13 High Gain 0–30 -15–+15 dB Gain of the high frequency
range
14 Balance #2 0–100 D100:0W–
D0:100W
Volume balance between the
direct sound (D) and the delay
sound (W)
15 Level 0–127 0–127 Output level
●0150: Monaural Delay
A delay that provides a long delay time.
No Parameter Value Description
1Delay Mode 0–1 ms, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
2Delay Time 0–127 1–2540 ms
Delay time from when the
original sound is heard to
when the delay sound is heard
(Hz)
3Delay Time
#1 0–21 note
Delay time from when the
original sound is heard to
when the delay sound is heard
(note)
4Phase 0–1 NORMAL,
INVERSE
Phase of the delay (NORMAL:
non-inverted, INVERSE:
inverted)
5Feedback 49–89 0–+80%
Proportion of the delay sound
that is to be returned to the
input
6HF Damp 0–17 200–8000 Hz,
Bypass
Frequency at which the
high-frequency content of
the delayed sound will be cut
(Bypass: no cut)
7Pan 0–127 L64–63R Panning of the delay sound
8Low Gain 0–30 -15–+15 dB Amount of boost/cut for the
high-frequency range
9High Gain 0–30 -15–+15 dB Amount of boost/cut for the
high-frequency range
10 Balance #2 0–100 D100:0W–
D0:100W
Volume balance of the original
sound (D) and the delay sound
(W)
11 Level 0–127 0–127 Output volume