MIDI Implementation
32
●0206: Enhancer Chorus
This e ect connects an enhancer and a chorus in series.
No Parameter Value Description
1Enhancer
Sens 0–127 0–127 Sensitivity of the enhancer
2Enhancer Mix 0–127 0–127 Level of the overtones
generated by the enhancer
3Chorus Pre
Delay 0–125 0.0–100.0 ms
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
4Chorus Rate
Mode 0–1 Hz, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
5Chorus Rate
#1 1–127 0.05–10.00
Hz Frequency of modulation (Hz)
6Chorus Rate 0–21 note Frequency of modulation
(note)
7Chorus
Depth 0–127 0–127 Depth of modulation
8Chorus
Balance #2 0–100 D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the chorus (W)
and the sound that is not sent
through the chorus (D).
9Level 0–127 0–127 Output Level
●0207: Enhancer Flanger
This e ect connects an enhancer and a  anger in series.
No Parameter Value Description
1Enhancer
Sens 0–127 0–127 Sensitivity of the enhancer
2Enhancer Mix 0–127 0–127 Level of the overtones
generated by the enhancer
3Flanger Pre
Delay 0–125 0.0–100.0 ms
Adjusts the delay time from
when the direct sound begins
until the  anger sound is
heard.
4Flanger Rate
Mode 0–1 Hz, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
5Flanger Rate
#1 1–127 0.05–10.00
Hz Frequency of modulation (Hz)
6Flanger Rate 0–21 note Frequency of modulation
(note)
7Flanger
Depth 0–127 0–127 Depth of modulation
8Flanger
Feedback 0–98 -98–+98%
Adjusts the proportion of the
anger sound that is fed back
into the e ect. Negative (-)
settings will invert the phase.
9Flanger
Balance #2 0–100 D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the  anger (W)
and the sound that is not sent
through the  anger (D).
10 Level 0–127 0–127 Output Level
●0208: Enhancer Delay
This e ect connects an enhancer and a delay in series.
No Parameter Value Description
1Enhancer
Sens #1 0–127 0–127 Sensitivity of the enhancer
2Enhancer Mix 0–127 0–127 Level of the overtones
generated by the enhancer
3Delay Time
Mode 0–1 ms, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
No Parameter Value Description
4Delay Time 0–127 1–2540 ms
Adjusts the delay time from
the direct sound until the
delay sound is heard. (ms)
5Delay Time 0–21 note
Adjusts the delay time from
the direct sound until the
delay sound is heard. (note)
6Delay
Feedback 49–89 0–+80%
Adjusts the proportion of the
delay sound that is fed back
into the e ect.
7Delay HF
Damp 0–17 200–8000 Hz,
Bypass
Adjusts the frequency above
which sound fed back to
the e ect will be cut. If you
do not want to cut the high
frequencies, set this parameter
to Bypass.
8Delay
Balance #2 0–100 D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the delay (W)
and the sound that is not sent
through the delay (D).
9Level 0–127 0–127 Output Level
●0209: Chorus Delay
This e ect connects a chorus and a delay in series.
No Parameter Value Description
1Chorus Pre
Delay 0–125 0.0–100.0 ms
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
2Chorus Rate
Mode 0–1 Hz, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
3Chorus Rate 1–127 0.05–10.00
Hz Frequency of modulation (Hz)
4Chorus Rate 0–21 note Frequency of modulation
(note)
5Chorus
Depth 0–127 0–127 Depth of modulation
6Chorus
Balance #1 0–100 D100:0W–
D0:100W
Volume balance between
the direct sound (D) and the
chorus sound (W)
7Delay Time
Mode 0–1 ms, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
8Delay Time 0–127 1–2540 ms
Adjusts the delay time from
the direct sound until the
delay sound is heard. (ms)
9Delay Time 0–21 note
Adjusts the delay time from
the direct sound until the
delay sound is heard. (note)
10 Delay
Feedback 49–89 0–+80%
Adjusts the proportion of the
delay sound that is fed back
into the e ect.
11 Delay HF
Damp 0–17 200–8000 Hz,
Bypass
Adjusts the frequency above
which sound fed back to
the e ect will be cut. If you
do not want to cut the high
frequencies, set this parameter
to Bypass.
12 Delay
Balance #2 0–100 D100:0W–
D0:100W
Adjusts the volume balance
between the sound that is
sent through the delay (W)
and the sound that is not sent
through the delay (D).
13 Level 0–127 0–127 Output Level