MIDI Implementation
25
●0143: Space D
This is a multiple chorus that applies two-phase modulation in stereo. It gives no
impression of modulation, but produces a transparent chorus e ect.
No Parameter Value Description
1Pre Delay 0–125 0.0–100.0
ms
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
2Rate Mode 0–1 Hz, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
3Rate #1 1–127 0.05–10.00
Hz Frequency of modulation (Hz)
4Rate 0–21 note Frequency of modulation (note)
5Depth #2 0–127 0–127 Depth of modulation
6Phase 0–90 0–180 deg Spatial spread of the sound
7Low Gain 0–30 -15–+15 dB Gain of the low range
8High Gain 0–30 -15–+15 dB Gain of the high range
9Balance 0–100 D100:0W–
D0:100W
Volume balance between the
direct sound (D) and the chorus
sound (W)
10 Level 0–127 0–127 Output Level
●0144: 3D Chorus
This applies a 3D e ect to the chorus sound. The chorus sound will be positioned 90
degrees left and 90 degrees right.
No Parameter Value Description
1Filter Type 0–2 O , Lpf, Hpf
Type of  lter
O : No  lter is used
Lpf: Cuts the frequency range
above the Cuto Freq
Hpf: Cuts the frequency range
below the Cuto Freq
2Cuto Freq 0–16 200–8000 Hz Basic frequency of the  lter
3Pre Delay 0–125 0.0–100.0 ms
Adjusts the delay time from
the direct sound until the
chorus sound is heard.
4Rate Mode 0–1 Hz, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
5Rate #1 1–127 0.05–10.00
Hz Frequency of modulation (Hz)
6Rate 0–21 note Frequency of modulation
(note)
7Depth #2 0–127 0–127 Modulation depth of the
chorus e ect
8Phase 0–90 0–180 deg Spatial spread of the sound
9Output Mode 0–1 Speaker,
Phones
Adjusts the method that will
be used to hear the sound
that is output to the OUTPUT
jacks.
The optimal 3D e ect will
be achieved if you select
Speaker when using speakers,
or Phones when using
headphones.
10 Low Gain 0–30 -15–+15 dB Gain of the low range
11 High Gain 0–30 -15–+15 dB Gain of the high range
12 Balance 0–100 D100:0W–
D0:100W
Volume balance between
the direct sound (D) and the
chorus sound (W)
13 Level 0–127 0–127 Output Level
●0145: 2Band Chorus
A chorus e ect that lets you apply an e ect independently to the low-frequency and
high-frequency ranges.
No Parameter Value Description
1Split Freq 0–16 200–8000 Hz
Frequency at which the
low and high ranges will be
divided
2Low Pre
Delay 0–125 0.0–100.0 ms
Delay time from when the
original sound is heard to
when the low-range chorus
sound is heard
3Low Rate
Mode 0–1 Hz, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
4Low Rate 1–127 0.05–10.00
Hz
Rate at which the low-range
chorus sound is modulated
(Hz)
5Low Rate 0–21 note
Rate at which the low-range
chorus sound is modulated
(note)
6Low Depth
#1 0–127 0–127 Modulation depth for the
low-range chorus sound
7Low Phase 0–90 0–180 deg Spaciousness of the low-range
chorus sound
8High Pre
Delay 0–125 0.0–100.0 ms
Delay time from when the
original sound is heard to
when the high-range chorus
sound is heard
9High Rate
Mode 0–1 Hz, note
When this is set to “note,” the
e ect is synchronized with the
tempo.
10 High Rate 1–127 0.05–10.00
Hz
Rate at which the low-range
chorus sound is modulated
(Hz)
11 High Rate 0–21 note
Rate at which the low-range
chorus sound is modulated
(note)
12 High Depth
#2 0–127 0–127 Modulation depth for the
high-range chorus sound
13 High Phase 0–90 0–180 deg Spaciousness of the high-
range chorus sound
14 Balance 0–100 D100:0W–
D0:100W
Volume balance of the original
sound (D) and chorus sound
(W)
15 Level 0–127 0–127 Output volume