12
Panel Descriptions
[RHYTHM PATTERN]
This button accesses the Rhythm Pattern playback screen (p. 79).
[PART SELECT/TONE SW/SEL]
When you press this button so it’s lit, the category group buttons
will operate as part select, tone switch, or tone select buttons.
[RHYTHM]–[BASS]
These are the category group buttons (only in Patch mode).
Function Buttons
([F1 (KBD/ORG)]–[F6 (VOCAL/PAD)])
The row of six buttons below the display are used to carry out
various functions during editing and other tasks. The functions of
these buttons will depend on the screen that you’ve selected (p. 23).
VALUE Dial
This is used to modify values. If you hold down [SHIFT] as you turn
the VALUE dial, the value will change in greater increments (p. 24).
[DEC], [INC]
This is used to modify values. If you keep on holding down one
button while pressing the other, the value change accelerates. If you
press one of these buttons while holding down [SHIFT], the value
will change in bigger increments (p. 24).
[ ], [ ], [ ], [ ]
Moves the cursor location up/down/left/right (p. 24).
[SHIFT]
This button is used in conjunction with other buttons to execute
various functions.
[EXIT]
Return to the previous screen, or close the currently open window.
In some screens, this causes the currently executing function to be
aborted.
[ENTER]
Use this button to execute an operation.
SONG RECORDER
[AUDIO TRACK]
This button accesses the Audio Track screen (p. 104, p. 108).
[TEMPO]
Sets the tempo (BPM) (p. 73, p. 79, p. 85, p. 88).
[LOOP]
Turns Loop Play on/off. The loop setting screen will appear when
you turn this on (p. 86, p. 95).
AUDIO IN Slider
This adjusts the AUDIO INPUT level. If you hold down [SHIFT]
while operating this slider, the Input Setting screen will appear (p.
104).
TRACK A1–A4 Sliders
These sliders adjust the volume of each audio track (stereo).
[BWD], [FWD]
Moves the song position to the first beat of the previous or next
measure (p. 85).
* While playback is stopped, you can hold down [STOP] and press
[BWD] to return the song position to the beginning of the song. If you
press this during playback, you will return to the beginning of the
song and stop.
[STOP]
Controls song recorder stop.
[PLAY]
Controls song recorder play.
* While stopped, you can hold down [SHIFT] and Press [
PLAY
] to
perform MIDI Update (p. 86).
[REC]
The display changes to the Recording Standby window (p. 88, p. 92,
p. 105). If you press this button while recording a MIDI track, the
Rehearsal function will be activated (p. 92).
SOUND MODIFY
Turn these knobs to adjust the sound in real time or to edit
parameter values.
Pressing the button located at the left of knobs 1–4 will change the
illumination status of the indicators located above the button, and
will change the function of knobs 1–4 (p. 30).
* In the performance mode, this button doesn’t function.
The CUTOFF knob and RESONANCE knob are dedicated to
controlling Cutoff Frequency and Resonance (p. 30).
Pitch Bend/Modulation Lever
This allows you to control pitch bend or apply vibrato (p. 16).
7
8
9
10
JUNO-G_e.book 12 ページ ２００６年２月１３日　月曜日　午後２時４４分