150
Adding Effects
66: OVERDRIVE

CHORUS

fig.MFX-66

67: OVERDRIVE

FLANGER

fig.MFX-67

68: OVERDRIVE

DELAY

fig.MFX-68

69: DISTORTION

CHORUS

The parameters are essentially the same as in “66: OVERDRIVE

CHORUS,” with the exception of the following two.

Overdrive Drive

Distortion Drive, Overdrive Pan

Distortion Pan

fig.MFX-69

70: DISTORTION

FLANGER

The parameters are essentially the same as in “67: OVERDRIVE

FLANGER,” with the exception of the following two.

Overdrive Drive

Distortion Drive, Overdrive Pan

Distortion Pan

fig.MFX-70

71: DISTORTION

DELAY

The parameters are essentially the same as in “68: OVERDRIVE

DELAY,” with the exception of the following two.

Overdrive Drive

Distortion Drive, Overdrive Pan

Distortion Pan

fig.MFX-71

Parameter Value Explanation

Overdrive
Drive #
0–127 Degree of distortion
Also changes the volume.
Overdrive
Pan #
L64–63R Stereo location of the overdrive
sound
Chorus Pre
Delay
0.0–100.0 ms Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Chorus Rate # 0.05–10.00 Hz, note Frequency of modulation
Chorus Depth 0–127 Depth of modulation
Chorus
Balance #
D100:0W–D0:100W Adjusts the volume balance be-
tween the sound that is sent
through the chorus (W) and the
sound that is not sent through
the chorus (D).
Level 0–127 Output Level

Parameter Value Explanation

Overdrive
Drive #
0–127 Degree of distortion
Also changes the volume.
Overdrive
Pan #
L64–63R Stereo location of the overdrive
sound
Flanger Pre
Delay
0.0–100.0 ms Adjusts the delay time from
when the direct sound begins
until the flanger sound is heard.
Flanger Rate # 0.05–10.00 Hz, note Frequency of modulation
Flanger Depth 0–127 Depth of modulation
Flanger
Feedback #
-98– +98 % Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative (-) set-
tings will invert the phase.
Flanger
Balance #
D100:0W–D0:100W Adjusts the volume balance be-
tween the sound that is sent
through the flanger (W) and the
sound that is not sent through
the flanger (D).
Level 0–127 Output Level
L in
R in
Chorus

Overdrive

L out
R out
Balance W
Balance W
Balance D
Balance D
L in
R in

Flanger

Overdrive

L out
R out
Balance W
Balance W
Balance D
Balance D
Feedback
L in
R in
Delay

Overdrive

L out
R out
Balance W
Balance W
Balance D
Balance D
Feedback

Parameter Value Explanation

Overdrive
Drive #
0–127 Degree of distortion
Also changes the volume.
Overdrive Pan # L64–63R Stereo location of the over-
drive sound
Delay Time 0–2600 ms, note Adjusts the delay time from
the direct sound until the de-
lay sound is heard.
Delay
Feedback #
-98– +98 % Adjusts the proportion of the
delay sound that is fed back
into the effect. Negative (-)
settings will invert the phase.
Delay HF Damp 200–8000 Hz,
BYPASS
Adjusts the frequency above
which sound fed back to the
effect will be cut. If you do not
want to cut the high frequen-
cies, set this parameter to BY-
PASS.
Delay Balance # D100:0W–D0:100W Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through
the delay (D).
Level 0–127 Output Level
L in
R in
Chorus

Distortion

L out
R out
Balance W
Balance W
Balance D
Balance D
L in
R in

Flanger

Distortion

L out
R out
Balance W
Balance W
Balance D
Balance D
Feedback
L in
R in
Delay

Distortion

L out
R out
Balance W
Balance W
Balance D
Balance D
Feedback
JUNO-G_e.book 150 ページ 2006年2月13日 月曜日 午後2時44分