165

File-Related Functions (File Utility)

Here you can perform a variety of operations related to the files
stored in the JUNO-G’s user memory, and on memory cards. You
can copy, delete, or move files, as well as format memory cards.
The folder structure of the user area and memory card is as follows.

fig.Folders.e

You must observe the following points when managing files
with the JUNO-G connected to your computer via USB.
• Don’t use your computer to move or delete folders within the
JUNO-G.
• Don’t use your computer to format or optimize the JUNO-G’s
user memory or memory card, or execute operations such as
Scan Disk.
• The JUNO-G can only handle filenames consisting of single-
byte alphanumeric characters.
• Don’t use your computer to delete or overwrite the files located
in the ROLAND/SND folder.
When copying files from your computer into the JUNO-G’s user area
or memory card, place them in the following folders.

Don’t place any files in the ROLAND/SMPL folder.

Don’t place files of any other format in the user memory or
memory card.

1.

Press EDIT [MENU] to open the Top Menu window.

2.

Press [ ] [ ] to select “4. File Utility,” and then press
[ENTER].

The FILE UTILITY screen appears.

fig.FileUtility

3.

Press [F1]–[F6] to select the operation you want to carry out.

[F1 (USER)]: Select a file in user memory.
[F2 (CARD)]: Select a file on the memory card.
[F3 (MARK)]: If you want to select two or more files, add a
check mark (

✔

) to the files. To remove the check
mark from a selected file, select and press this
button again.
[F4 (DELETE)]: Delete a selected file or files with check marks.
[F5 (MOVE)]: Move a file or files with check marks to a
different folder.
[F6 (COPY)]: Copy a file or files with check marks to a
different folder.
[ ] [ ]: Select the folder.
[ ] [ ]: Move between folder levels.

If you hold down [SHIFT] and press [F5 (SET ALL)], check
marks will be added to all files.
If you hold down [SHIFT] and press [F4 (CLR ALL)], check
marks will be removed from all files.

* You can also perform these operations from the FILE UTILITY screen
by pressing EDIT [MENU] and selecting “1. Mark Set ALL” or “2.
Mark Clear ALL.”

Computer JUNO-G

SONG file (.SVQ, .SVA) ROLAND/SEQ/SNG
Standard MIDI file (SMF format 0, 1) ROLAND/SEQ/SNG
Audio file (WAV/AIFF) TMP/AUDIO_IMPORT

: Not used with the JUNO-G

ROLAND
(User, Card)
TMP
PNL
SEQ
SMPL
SND
SNG
BMP
TEXT
AUDIO_IMPORT

Basic Procedure

JUNO-G_e.book 165 ページ ２００６年２月１３日　月曜日　午後２時４４分