186
Error Messages
If an incorrect operation is performed, or if processing could not be performed as you specified, an error message will appear. Refer to the
explanation for the error message that appears, and take the appropriate action.
Message Meaning Action
Cannot Edit Preset Sample!
This is a preset sample, and therefore cannot be edited. —
Card Not Ready!
A memory card is not inserted in the slot. Insert a memory card into the slot.
Data not found
The data for placement is not specified. —
Empty Sample!
The sample contains no data. Select a sample that contains data.
Empty Song!
The song has not been recorded, and therefore cannot be
played.
Select a song that contains data.
File Name Duplicate
A file with the same name already exists. Delete the file bearing the same name from the disk,
and if overwriting and saving the data, merely save
the file. If you do not want to delete the file with the
same name from the disk, either save the file with a
different name.
Illegal File!
The JUNO-G cannot use this file. —
Memory Damaged!
The contents of memory may have been damaged. Please perform the Factory Reset operation.
If this does not resolve the problem, please contact
your dealer or the nearest Roland Service Center.
Memory Full!
Saving is not possible because there is insufficient space
in the user area or memory card.
Delete unneeded data.
MIDI Offline!
There is a problem with the MIDI cable connection. Check that the MIDI cable has not been disconnect-
ed or broken.
Movable onto Bar Line Only
The beat change event can be put only on bar line (be-
ginning of a measure).
—
No More Note Numbers!
A maximum of 16 different note numbers can be used in
one style of the arpeggio/rhythm function.
Please delete unneeded notes.
No More Sample Numbers!
The sample cannot be divided any further. Erase unneeded samples in order to allocate 256 or
more consecutive sample numbers.
Since fewer than 256 consecutive sample numbers are
vacant, no further sampling is possible.
No More Song Numbers!
No more songs can be saved. A maximum of 256 songs
can be handled simultaneously for both the user bank
and card bank.
Please delete unneeded songs.
Now Playing!
Since the JUNO-G is playing, this operation cannot be
executed.
Stop playback before you execute the operation.
Permission Denied!
The file is protected. —
Playback Tempo Range Over
Tempo values exceed the allowable limit, and data is
created in which the closest time available within the al-
lowable range is specified.
—
Power off and check DIMM
Turn off the power immediately, and re-insert the
DIMM memory correctly.
—
Recording Parameter Error
You are attempting to begin recording after a looped
segment.
You are attempting to begin recording within or be-
fore a looped segment.
Rec Over Flow
Since a large amount of recorded data was input all at
once, it could not be processed correctly.
Reduce the amount of recorded data.
Sample Length Too Short!
The sample is too short, and cannot be edited correctly. If the sample is extremely short, editing may not
produce the desired result.
Sample Memory Full!
Since there is insufficient sample memory, no further
sampling or sample editing is possible.
Erase unneeded samples.
Song Format Error
This song is damaged. This song cannot be used.
Song Full
Since the maximum number of notes that can be record-
ed in a song has been exceeded, no further recording/
editing is possible.
Use the track edit Delete or Erase commands to re-
move unneeded data from the song that you are re-
cording/editing.
Song Not Found
The selected song cannot be found. —
Too Many Sample Selected!
The operation cannot be executed, since marks are as-
signed to more than one sample.
Either clear the marks, or mark only one sample.
Unformatted!
The memory card is in an unsupported format. Format the memory card.
You Cannot Copy This Message
This message cannot be copied. —
You Cannot Erase This Message
This message cannot be erased. —
You Cannot Move This Message
This message cannot be moved. —
JUNO-G_e.book 186 ページ ２００６年２月１３日　月曜日　午後２時４４分