28
Playing in Patch Mode
In the patch mode, you can bring together your favorite and most
frequently used patches (or rhythm sets) in one place by registering
them in the favorite patch. By using this function, you can rapidly
select favorite patches from Preset/User/Card area or a Wave
Expansion Board. You can register a total of 64 sounds (8 sounds x 8
banks) as favorite patches.

Registering a Favorite Patch/Rhythm Set

1.
In the PATCH PLAY screen, select the patch (or rhythm set)
that you wish to register.
2.
Press [ENTER] to access the PATCH LIST screen.
3.
Press [F3 (FAVORIT)].
The FAVORITE PATCH screen appears.
4.
Press [ ] [ ] to select the Bank.
5.
Use the VALUE dial, [INC] [DEC], or [ ] [ ] to select a
favorite number.
6.
Press [F2 (REGIST)] to execute the registration.
7.
Press [F3 (LIST)] to return to the PATCH LIST screen.
You can hold down MODE [AUDITION] or [F5 (PREVIEW)] to
audition the patch or rhythm set.
Canceling a patch registration
By pressing [F1 (REMOVE)] you can cancel the patch (or rhythm set)
registration that is selected in the FAVORITE PATCH screen.

Choosing the Favorite Patch/Rhythm Set

1.
Press MODE [PATCH] to access the PATCH PLAY screen.
2.
Press [ENTER] to access the PATCH LIST screen.
3.
Press [F1 (FAVORIT)].
The FAVORITE PATCH screen appears.
4.
To change the Bank, use the VALUE dial or [ ] [ ].
5.
Press [INC] [DEC] or [ ] [ ] to select the patch.
6.
Press [F6 (SELECT)] or [ENTER] to confirm your selection.
This function lets you audition a patch using a suitable phrase that’s
provided for each type (category) of patch.
1.
In the PATCH PLAY screen, PATCH LIST screen, RHYTHM
LIST screen, FAVORITE PATCH screen, or CATEGORY
screen, hold down MODE [AUDITION].
The patch (rhythm set) selected in the screen will play.
2.
The audition playback will stop when you take your finger
off the [AUDITION] button.
You can use the Preview Mode parameter to change the way in
which Phrase Preview plays the sound. (p. 158)
The Octave Shift function transposes the pitch of the keyboard in 1
octave units (-3– +3 octaves).
For playing a bass part more easily using your right hand, transpose
the keyboard down by 1 or 2 octaves.
* Octave Shift applies only to the keyboard part.
1.
In the PATCH PLAY screen, press OCTAVE [-] or [+] to set
the amount of transposition (-3– +3).
The button will light if this is set.
• Each time you press OCTAVE [+], the amount of transposition
will change in the order of +1, +2, and +3. Each time you press
OCTAVE [-], the amount of transposition will change in the
order of -1, -2, and -3.
• [UP] will light if the setting is +1, +2, or +3; [DOWN] will light if
the setting is -1, -2, or -3.
• Press both buttons simultaneously to return the setting to 0.
There is a single Octave Shift setting (Setup parameter) for the
entire JUNO-G. The changed setting will be remembered even if
you switch patches or performances.

Selecting Favorite Patches/Rhythm

Sets (Favorite Patch)

Auditioning a Patch or Rhythm Set (Phrase Preview)Transposing the Keyboard in Octave Units (Octave Shift)
JUNO-G_e.book 28 ページ ２００６年２月１３日　月曜日　午後２時４４分