98
Editing a Song (MIDI Track)

This function copies a specified area of sequencer data. It is

convenient for repeating the same phrase several times.

For details on the settings, refer to

Basic Operation for Track

Editing

(p. 97).

* If you selected “ALL” for “Src Ch/Part” and “Dst Ch/Part,” the tempo

track, beat track, and audio tracks will also be copied at the same time.

This function erases all the sequencer data inside the specified area. As

the erased data is replaced by rests, the original measures will remain.

For details on the settings, refer to

Basic Operation for Track

Editing

(p. 97).

* If you selected “ALL” for “Ch/Part,” the tempo track and beat track

will also be erased at the same time.

This function deletes a specified area of sequencer data, and moves

the subsequent data to fill the gap. As a result, the measure length

will be shortened by the number of deleted measures.

For details on the settings, refer to

Basic Operation for Track

Editing

(p. 97).

* The tempo track, beat track, and audio tracks will also be deleted at the

same time.

Copying Phrases (Copy)
Parameter Value Explanation
Src Ch/Part ALL, Ch 1–16 MIDI channel of the perfor-
mance data to be copied
ALL:
Copies all the sequencer data.
Ch 1–16:
Copies only the sequencer data of a specific
MIDI channel.
* You can’t specify this if Status is set to “System Exclusive.”
Src Measure 0001– Range of copy-source mea-
sures
If you set “For” to “ALL,”
all measures will be speci-
fied.
For 1–ALL
Dst Ch/Part ALL, Ch 1–16 MIDI channel of the copy-
destination performance
data
ALL:
Copy performance data to all MIDI channels.
Ch 1–16:
Copy performance data to the specified MIDI
channel.
* You can’t specify this if Status is set to “System Exclusive.”
Dst Measure 0001–END Copy-destination measure
* If you want the copy destina-
tion to be right after the last
measure of a song, set this
parameter to “END.”
Copy Mode MIX, REPLACE Specifies whether you want
to preserve the existing data
in the copy destination when
copying.
MIX:
Combines the data from the copy source with the
existing data in the copy destination.
REPLACE:
Musical data in the copy destination will
be erased (i.e., overwritten) when the copy takes place.
Only the sequencer data of the MIDI channels specified
by the Channel parameter will be overwritten, and
data of other MIDI channels will remain.
Copy Times 1–999 Number of times that the
data will be copied to the
copy destination
Status

ALL, Note, Poly Aftertouch,

Control Change, Program

Change, Channel Aftertouch,

Pitch Bend, System Exclusive

Type of data to be copied
When “Status” is “Note” or “Poly Aftertouch”
Range Min 0 (C -)–127 (G9) Range of note numbers to be
copied
You can also specify the
key range by pressing
keys on the keyboard.
Range Max
When “Status” is “Control Change”
Range Min 0–127 Range of controller numbers
to be copied
Range Max
When “Status” is “Program Change”
Range Min 1–128 Range of program numbers
to be copied
Range Max
Erasing Unwanted Performance Data (Erase)
Parameter Value Explanation
Ch/Part ALL, Ch 1–16 MIDI channel of the data to
be erased
ALL:
Erases all sequencer data.
Ch 1–16:
Erases sequencer data of one specific MIDI
channel only.
* You can’t specify this if Status is set to “System Exclusive.”
Measure 0001– Range of measures to be
erased
If you set “For” to “ALL,”
all measures will be speci-
fied.
For 1–ALL
Status

ALL, Note, Poly Aftertouch,

Control Change, Program

Change, Channel Aftertouch,

Pitch Bend, System Exclusive

Type of data to be erased
When “Status” is “Note” or “Poly Aftertouch”
Range Min 0 (C -)–127 (G9) Range of note numbers to be
erased
You can also specify the
key range by pressing
keys on the keyboard.
Range Max
When “Status” is “Control Change”
Range Min 0–127 Range of controller numbers
to be erased
Range Max
When “Status” is “Program Change”
Range Min 1–128 Range of program numbers
to be erased
Range Max
Deleting Unwanted Measures (Delete)
Parameter Value Explanation
Measure 0001– Range of measures to be deleted
If you set “For” to “ALL,” all measures will be
specified.
For 1–
ALL
JUNO-G_e.book 98 ページ ２００６年２月１３日　月曜日　午後２時４４分