Roland TD-20 Connecting Two Patterns F2 Append, Erasing a pattern F3 Erase, Press F2 Append

Chapter 7. Sequencer (Recording/Editing)

Connecting Two Patterns [F2 (APPEND)]

This connects two patterns to create one pattern. The pattern specified as “Dst” will be first, and the pattern specified as “Src” will be connected to it. The new pattern will be created in “Dst.”

Dst				Src
1	2	3	4	1	2	3	4
				+

1 2 3 4 5 6 7 8

Dst

1.Press [PATTERN] - [F4 (EDIT)].

The “PATTERN EDIT” screen appears.

2.Press [F2 (APPEND)].

“APPEND PATTERN” screen appears.

3.Press [CURSOR (up)] to move the cursor to “Src.”

4.Use [+/-] or [VALUE] to select the pattern that will come later.

5.Press [CURSOR (down)] to move the cursor to “Dst.”

6.Use [+/-] or [VALUE] to select the pattern that will come first.

7.Press [F5 (APPEND)].

The confirmation screen appears.

8.Press [F5 (EXECUTE)].

*To cancel, press [F1 (CANCEL)].

Erasing a pattern [F3 (ERASE)]

This erases the pattern. Performance data is erased, while beat, measure length, and other settings are left intact.

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8

You can erase portions of the pattern, in measure units. The erased portions become blank measures.

1 2 3 4 5 6 7 8

1 2 3 4 5 6 7 8

Although the data is erased, the pattern length is unchanged.

1.	Press [PATTERN] - [F4 (EDIT)].
	The “PATTERN EDIT” screen appears.	7	[REC]
2.	The “ERASE PATTERN” screen appears.	Chapter
	Press [F3 (ERASE)].

3.When you want to erase selected measures or part, press [F4 (MEASURE)].

The “ERASE PATTERN MEASURE” screen appears.

4.Press [CURSOR (left/right)] to select the parameter.

5.Use [+/-] or [VALUE] to select the pattern, part, and measures.

65