Roland TD-20 owner manual Deleting a Pattern F4 Delete

Chapter 7. Sequencer (Recording/Editing)

		2.	Press [F4 (DELETE)].
Pattern	Part	Measure	The “DELETE PATTERN” screen appears.
Pattern to be	Part to be	Measures to be erased
erased	erased	(First Measure–Last Measure)

6.Press [F5 (ERASE)].

The confirmation screen appears.

3. When you want to delete selected measures,

press [F4 (MEASURE)].

The “DELETE PATTERN MEASURE” screen appears.

7.Press [F5 (EXECUTE)].

*To cancel, press [F1 (CANCEL)].

Deleting a Pattern [F4 (DELETE)]								4.		Press [CURSOR (left/right)] to select the
This deletes the pattern performance, beat, measure length,										parameter.
								5.		Use [+/-] or [VALUE] to select the pattern and
part, and all other settings, creating a empty pattern.
										measures.
1	2	3	4	5	6	7	8
									Pattern		Measure
									Pattern to be deleted		Measures to be deleted
1											(First Measure–Last Measure)
								6.		Press [F5 (DELETE)].
You can delete unneeded measures from the pattern, then										The confirmation screen appears.
connects the portions before and after the resulting gap.
1	2	3	4	5	6	7	8
								7.		Press [F5 (EXECUTE)].
1	2	3	7	8				*		To cancel, press [F1 (CANCEL)].

•The performance data following the deleted range is moved forward (and the performance data for that part is shortened).

•When all parts in the targeted range are specified, deletion results in the pattern itself becoming shorter.

•When all measures for all parts are deleted, the pattern itself is deleted, resulting in a pattern containing no performance data (an empty pattern). Settings, including beat and measure length, are restored to their initial values as well.

1.Press [PATTERN] - [F4 (EDIT)].

The “PATTERN EDIT” screen appears.

66