Roland TD-20 Copy Function Copy, Press Copy, Press F1-F5 to select what you want to copy

Chapter 8. Copy Function [COPY]

You can copy drum kits, instruments, etc. to the destination of your choice.

Copying will overwrite the data that was in the new destination. So take caution when performing this operation.

1.Press [COPY].

[COPY] lights, and the “COPY” screen appears. If a CompactFlash card is inserted into the CompactFlash card slot, the CompactFlash indicator also lights (p. 70).

2.Press [F1]–[F5] to select what you want to copy.

[F1	(KIT)]:	drum kit
[F2	(INST)]:	drum instrument
[F3	(PERC)]:	percussion set
[F4	(TRIG)]:	trigger bank
[F5	(CHAIN)]: drum kit chain

3.Use [CURSOR], [+/-], or [VALUE] to select the copy-source and the copy-destination.

AB D F

C E G

A:copy-source type (PRESET, USER, or CARD)

B:copy-source

C:copy-destination

D:backup containing the copy-source

(This appears when “CARD” is selected for the copy- source type.)

E:exchange button

(This appears when “USER” is selected for the copy- source type.)

F:copy-source pad

(This appears when copying a drum instrument.)

G:copy-destination pad

(This appears when copying a drum instrument.)

4.Press [F4] or [F5].

[F4 (EXCHNG)]:

The contents of the copy-source and copy-destination are exchanged. (This can be selected when a “USER” data is used for the copy-source.)

[F5 (COPY)]:

The previous content of the copy-destination is overwritten by the content of the copy-source.

The confirmation screen appears. (Example: Copying a drum kit)

*To cancel, press [F1 (EXIT)].

5.Press [F5 (EXECUTE)] to carry out the procedure.

“EXCHNG” is convenient for changing the order of data in a sequence.

For details on copying a pattern, refer to p. 64.

8	[COPY]
Chapter

69