Manuals / Roland / Musical Instruments & Equipment / Musical Instrument

Roland Saving Data to an external Midi, Device Bulk Dump F5 Bulk, Loading Data to the TD-20

Models: TD-20

1 112

Download 112 pages 54.34 Kb

Page 77

		Chapter 10. Settings for the Entire TD-20 [SETUP]

	5.		Start the recording process of the external
Saving Data to an external MIDI			sequencer.
Device (Bulk Dump) [F5 (BULK)]		6.	Press [F5 (EXECUTE)] to begin sending the
Saving Data			data.
Saving Data

To save data, use the external sequencer as you would when recording musical data, and perform the following steps on the TD-20 as shown in the following diagram.

1.Connect the TD-20’s MIDI OUT connector with a

MIDI cable to the MIDI IN connector of the			*	If you want to stop sending, press [F5 (STOP)].
external sequencer.			7.	When finished, the following screen appears.
			7.	When finished, the following screen appears.

MIDI IN

MIDI OUT

			Bulk Dump is one kind of System Exclusive message. Be
			sure to use an external MIDI sequencer that is capable of
		TD-20	recording System Exclusive messages. In addition,
	Sequencer	TD-20	confirm that the sequencer is not set to “Do not receive
	2. Press [SETUP].		System Exclusive messages.”
	2. Press [SETUP].
	[SETUP] lights.		Loading Data to the TD-20
	3. Press [F1 (MIDI)] - [F5 (BULK)].		Loading Data to the TD-20
	3. Press [F1 (MIDI)] - [F5 (BULK)].
	The “MIDI BULK DUMP” screen appears.
			At this time, all the TD-20’s current data is overwritten.
			Make sure you have made the needed backup.
			1. Connect the TD-20’s MIDI IN connector with a
			MIDI cable to the MIDI OUT connector of the
	4. Press [+/-], [VALUE], and [CURSOR (up/down)]		external sequencer.
	to select the content to be sent.
	Transmit Data	Description
	ALL	All data, including setup, drum kits,	MIDI OUT	MIDI IN
		user percussion sets, user patterns	MIDI OUT	MIDI IN
		user percussion sets, user patterns
	SETUP	Trigger, pad, and other kinds of set-
		tings
	ALL DRUM KITS	All data for drum kits 1–50
	1 DRUM KIT	Only the data for the selected drum
		kit
	ALL TRIG BANKS	All settings for trigger banks 1–4
	1 TRIG BANK	Only the settings for the selected	Sequencer	TD-20
		trigger bank	2. Press “PLAY” on the external sequencer to
	ALL PERC	All data for the user percussion sets	2. Press “PLAY” on the external sequencer to
	ALL PERC	All data for the user percussion sets	transmit the data to the TD-20.
	GROUPS	1–8	transmit the data to the TD-20.
	1 PERC GROUP	Only the data for the selected percus-	Received data is written into the TD-20.
		sion set
	ALL PATTERNS	All data for the user patterns 101–200

Chapter 10 [SETUP]

77

Image 77

Contents

201b For the U.K Important Safety InstructionsPage Page Important Notes Additional Precautions Contents Mixer Settings Sequencer Playback Drum Kit Chain Chain Features Functions For Stage Top Quality Signal ProcessingSequencer Advanced Tempo FunctionsTop Panel Panel DescriptionsPhones Knob Setup ButtonMaster Knob Trigger ButtonRear Panel CompactFlash Card Slot Front PanelPhones Jack Mounting the TD-20 on the Stand Setting Up the Kit10 / Ride Connecting the Pads and PedalsSet Up Example Front Panel Connecting Headphones, Audio Equipment, Amps, or Other GearTurning On/Off the Power Connecting the Hi-Hat Adjusting Mesh Head Tension PD-125/105Adjusting the Offset Hold down KIT and press TriggerDemo Song Listening to the Demo SongFunction Buttons Button Operation and Displays Saving Your SettingsButtons, Sliders, Dial and Knobs Cursor Changing Data ValuesChoosing Pads from the TD- 20’s Top Panel Group FadersHow to Turn the Metronome Click On/Off How to Play PatternsHow to Adjust the Tempo Adjusting the Display ContrastPad PD-125/105 Playing MethodsHi-Hat VH-12 Change the Nuance of the Rim ShotChoke Play Cymbal CY-15R/14CPositional Sensing Bell Shot CY-15RChoosing a Drum Kit Drum Kit Settings KITSelecting a Drum Kit from the List F1 List About the Drum KIT ScreenKit Parameters F2 Func Adjusting the Volume F1 VolumeAssigning a Tempo for Each Kit F2 Tempo Playing Brushes F3 BrushPlaying Cross Stick F5 Xstick Naming a Drum Kit F3 NamePress KIT F3 Name F1 InsertAssign an Instrument to a Pad Choosing a Pad to EditChoose by Hitting a Pad Choose with the Trigger Select ButtonsEditing Drum Sounds F2 Edit Selecting an Instrument from the List F1 ListHead ShellMuffle F3 MuffleSustain Other InstrumentsSizzle Playing a Pattern by Hitting a Pad Pad Pattern F1 Pattern Using Pads/Pedal as Controllers F3 ControlChanging the Pitch with the Hi-Hat Pedal F2 Pdlbend Press Inst F3 Control Strike a padWhen Setting Multiple Pads to the Same Note Number Midi Settings for Each Pad F3 MidiMidi Note Numbers transmitted by Hi-Hat F4 HH Midi About the Gate TimeMixer Parameters Mixer Mixer SettingsUsing Group Faders to Edit MIX Edit Using the Compressor and EQ COMP/EQ Effect SettingsEffects On and Off Switches Equalizer EQ Compressor CompAbout Threshold and Ratio EmphasisMulti-Effects Multi Effects Ambience AmbiencePress Ambience Press Multi EffectsMulti-Effects Parameters DelayFlanger Press Master COMP/EQ Master Effects MasterShelve PeakSelecting the Pad Type F1 Bank Trigger Inputs and Pad/Playing Methods corresponding chartPress Trigger F1 Bank Use +/- or Value to select the trigger typeHow Playing Dynamics Changes the Volume Velocity Curve Setting the Pad Sensitivity F2 BasicPad Sensitivity Minimum level for the pad ThresholdWhen HH Ctrl Type is set to VH Hi-Hat Settings F3 HI-HATWhen HH Ctrl Type is set to FD Press Trigger F3 HI-HATF3 Group Xtalk Group F1 Xtalk Xtalk CancelEliminate Crosstalk Between Pads F4 Xtalk Advanced Trigger Parameters F5 Advance Trigger Signal Detection Time Scan TimeDetecting Trigger Signal Attenuation Retrigger Cancel Double Triggering Prevention Rim Shots Response Rim Shot AdjustMask Time Cross Stick ThresholdCorrespondences Between Playing Method and Trigger Input Preset Patterns Pattern P Using Preset PatternsSequencer Playback Basic OperationSelect a Pattern from the List F1 List Choosing a Pattern PatternPlaying Back a Pattern Play About the Pattern screenSetting the Tempo by Hitting a Pad Tap Tempo Tempo AdjustmentSynchronizing with an External Midi Device Synchronizing to the playback of an external sequencerMuting a Specific Part F1 Mute Part Settings F2 PartMake Settings for the Backing Part F2 Backing Percussion Part Settings F3 Perc Choosing a Percussion Set Master TuningSelecting a Percussion Instrument Instrument Numbers/Instrument NamesFrom the List F1 List Making the Settings for EachNaming a Percussion Set F3 Name Percussion Instrument F2 EditEffect Settings for Backing Parts F5 REV/CHO Volume/Pan Settings for Each Part F4 MixerPress F4 Mixer Press F5 REV/CHOSupplementary function for Loop Pattern Settings F3 FuncChoosing a Playback Method F2 Starting and Stopping the Metronome Click On/Off Using a Indicator as a ClickNaming a Pattern F5 Name Supplementary function for TAPClick Instruments Setting the ClickPress Tempo F1 Click F2 TimesigRecording a Pattern REC How to RecordSelect an Empty Pattern Press F5 NEWPattern screen, press F3 Func F1 Setup Part SettingSelect a Midi Channel Part Midi ChannelSet the Recording Method Rec ModeRecording Checking the Tones and Phrases During Recording RehearsalCopying a Pattern F1 Copy Editing a Pattern F4 EditPress F2 Append Connecting Two Patterns F2 AppendErasing a pattern F3 Erase Deleting a Pattern F4 Delete Save/Load and Copy Functions of the TD Saving Patterns to a Memory Card F5 CardSaving a Pattern to a Memory Card F1 Save Deleting a Pattern from a Memory Card F3 Delete Loading a Pattern from a Memory Card F2 LoadCopy Function Copy Press F5 Execute to carry out the procedurePress Copy Press F1-F5 to select what you want to copyCard Menu screen Saving Data to a Memory Card F1 SaveLoading Data from a Memory Card F2 Load Naming a Backup F4 NameCard Save confirmation screen, press F4 Name Press F5 Execute to load the dataDeleting Data from a Memory Card F3 Delete Press F5 Execute to delete the backupFormatting a Memory Card F4 Format Press F4 FormatPress F5 Info Checking the State of a Memory Card F5 InfoSetting the Midi Channels for Each Part F1 Midi CH Midi Settings and Operations F1 MidiMidi Settings for the Entire TD-20 F2 Global Soft ThruDevice ID Local ControlLink Midi Ch V-LINK Midi Channel Link Device IDMidi Messages for Detailed Performance Expressions F3 Ctrl Switching Drum Kits via Midi Program Change F4 ProgHH Note# Border Hi-Hat Note Number Border Press F1 Midi F3 CtrlDevice Bulk Dump F5 Bulk Saving Data to an external MidiSaving Data Loading Data to the TD-20Output Destination for the Drum Instruments Selecting Output Destinations F2 OutputPress F3 Output F4 Other Press Cursor left/right to select the sourceUsing Foot Switches F1 Foot SW Setting the SwitchesPreview Button Settings Other Settings F4 OptionUsing Pads as Switches F2 PAD SW Adjusting the Display Contrast F5 LCD Restoring the Factory Settings F5 F ResetMaster Effect Mode F2 COMP/EQ Press F1 Edit Press Chain to switch Drum Kit Chain onCreating a Drum Kit Chain Naming a Drum Kit Chain F5 Name Playing with a Drum Kit ChainOutput Level Monitor F1 Monitor What is V-LINK?Checking the Current Status F2 Info Synchronizing Images to a TD-20 Performance F5 V-LINKTurning V-LINK On/Off Using V-LINKLink Functions that the TD-20 Can Control and Midi MessagesAbout Expansion Board How to Install a Expansion BoardLock Propos des carte d’extension Installation d’une carte d’extensionLock Message Meaning Action Messages and Error MessagesError Messages Messages Messages and Error MessagesNo. Name Remark Drum Instrument ListNo. NameRemark No. Name TOMSplash About Snare/Tom Instruments About RemarksAbout Cymbal Instruments CopyrightPercussion Set Guiro Short PC CC0 NameVOICES Backing Instrument List117 116118 119Midi Implementation Chart 101 Specifications Power Supply ConnectorsPower Consumption DimensionsTD-20 Block Diagram 105 Index Symbols Numerics107 108 109 Preset Pattern List Preset Drum Kit ListName Len Tempo NameFor Canada For EU CountriesFor the USA Information