Wired Internet Camera | User Manual | |
|
|
|
3.5 Motion Detection Settings
There are two sections of the Motion Detection: Basic Setting and Region Setting.
3.5.1 Motion Detection Basic Setting
Motion detection function makes this IP camera become your
Item | Description |
Motion Detection | Select “Enable” to start motion detection, and select |
Enable | “Disable” to disabled it. |
Next Event Detected | Specify the time interval between two motion |
Interval | detections in seconds. If a motion is detected after |
| last detection time, and before next detection time, |
| nothing will be send by Email or via FTP. |
| Please specify a time interval that suites your need. If |
| the time interval is too long, you may not be able to |
| know what is happened between time intervals; if the |
| time interval is too short, you may receive too much |
| unnecessary images, and consumes too much disk |
| storage spaces on Email and / or FTP server. |
Send snapshot file to | Select “Yes” to send a picture to the Email address |
you specified in | |
| is detection, and select “No” to disable this function. |
39