Rosewill RXS-3211 5.2.3 IP camera is not responding , 5.2.4 Image is fuzzy

Wired Internet Camera RXS-3211 User Manual

Internet connection. However, when the network connection is slow, a

lower frame rate / resolution setting will help resolve this issue.

d. Adjust the antenna if you’re using wireless connection. The antenna

should be perpendicular to the ground to get best reception, and the

distance between IP camera and computer / wireless access point

should not be too far.

e. Try to adjust “MTU” setting if you’re using PPPoE to connect to Internet.

Ask your ISP or network administrator for detailed instruction.

5.2.3 IP camera is not responding

a. Is the network cable or wireless connection disconnected? Please check

it.

b. Unplug the power adapter from wall socket and plug it in again after 10

seconds, then try to connect to the IP camera again.

c. If IP camera is correctly powered (“Power” LED is on), but you still can

not connect to the camera when you’re sure that IP address is correct,

please contact Rosewill’s customer service for help).

a. Use a soft cloth to clean the lens on the camera. (You can use cloth with

water, but DO NOT use alcohol or other chemical solution to apply on the

lens.)

b. Try to adjust brightness setting.