Wired Internet Camera | User Manual | |
|
|
|
Stand Connector
Figure 1.4-2 Rear View
WPS | Power Jack | LAN port |
Reset to Default | With 5V DC |
|
Stand Connector: Connects to any standard tripod / camera wall holder.
WPS / Reset Button: Press and release this button to activate WPS mode (WPS mode is not available in Wired Camera); press and hold this button for 10 seconds to clear all settings of this camera and return to factory default.
Power Jack: Connect to 5V power adapter.
LAN Jack: Connect to LAN by Ethernet cable.
1.5 LED Activities Description
LED Name | Status | Description |
Blue | Slow Blinking | Camera is booting |
|
|
|
| Steady On | Camera is correctly powered |
| Off | Camera is off |
Green | On | Camera is correctly powered |
|
|
|
| Off | Camera is not connected to LAN |
| Flash | Camera is logged in |
6
