Wired Internet Camera RXS-3211 User Manual
82
other computers on Internet.
The following instruction describes how to configure your router or firewall
device so your IPCAM can work with them. These instructions are based on a
commonly-available residential router and these setup techniques should be
easy to apply on any other similar devices as well.
5.3.2.1 Setup Dyndns Dynamic IP address Mapping
1. Go to your router’s setup page, and locate “DDNS”, “Dynamic DNS”, or
similar setup item.
2. Refer to last chapter and obtain a Dyndns account, password, and domain
name.
3. Enable Dynamic DNS function, select “DynDNS” as service provider, and
fill the information you obtained from Dyndns.org into Domain name,
Account, and Password field (these field’s name may different on your
router).