CD-100K Phonograph
2-86 21822666
BB. Setting the daily message display time(s): Push 0 (see NOTE #1 on Page 2-56)
When you initially program a message, you must activate the daily message display timer for that message. This
section discusses how to program messages to play at any given time of day for the week.
There are three available ON/OFF time settings for each day. There are also ON/OFF settings for each day of the
week.
The display screen reads MSG SCH SMTWTFS.
• MSG SCH means that you are in the MESSAGE SCHEDULE MENU. This menu allows daily message
plays.
• SMTWTFS - Selects the day (from Sunday to Saturday) to play messages.
A. Turning a message ON or OFF for a day of the week.
1. Hold RESET and repeatedly push the 2 or 3 key to move the cursor to the day you wish to play a message.
Release the RESET key and push POPULAR to enter the play menu for the day you have chosen.
2. Push the message number(s) that you wish to display for the selected day. (If the message number is
displayed, the message will be activated if the time ON/OFF is set. If the message number is blanked,
that message will not be displayed.) Push POPULAR to save your program settings.
B. Setting the time of day to play a message (three available ON/OFF time settings per day).
1. Hold RESET and push 3 to enter the TIME ON menu. Release the RESET key.
2. Determine the time you would like the message to begin playing. Enter the hour and push POPULAR.
Enter the minutes and press POPULAR. Hold RESET and push 3 to move to the TIME OFF menu for
the selected message. Release the RESET key.
3. Determine the time you would like the message to turn off. Enter the hour and press POPULAR. Enter
the minutes and press POPULAR.
4. If additional TIME ON/OFF for this day is required, hold RESET and push 3, then release the RESET
key. Go back to step A-2, and go through step B1-4.
5. When the daily message schedule has been completed for one day, the schedule may then be copied to
the other six days by following this procedure:
Hold RESET and push 9 to return to display - MSG SCH SMTWTFS
The letter which is flashing should be the day you have just completed setting up the times for.
Hold RESET and push 8. The display reads CPY XX* -> S .
To copy the date to the remaining six days, push and hold RESET and push key 3 until the display shows
CPY XX*-> SMTWTFS. Release RESET, then push POPULAR.
* XX denotes the day ON/OFF times that have been entered.