CD-100K Phonograph
1-4 21822666
Title Page Assembly in the “UP” Position
Figure 1-2. Title Page
Title Page Assembly
1. Remove the shipping screws from both ends of the lower title page assembly support bracket.
2. Remove the shipping band from the front of the title page assembly.
3. Check to see if the title page assembly is plugged in (see Figure 1-2 above).
4. Remove (2) shipping screws from the back of the cabinet (toward the top) to allow title page assembly removal.
WARNING:Do not attempt to turn the CD title pages by hand. Use the handwheel on the back of the
title page assembly (see Figure 1-2). Title rack will not operate without the two Shipping
Screws being removed. Trying to force movement in the Title rack can result in broken
parts.
Shipping Screw Locations
Plug Connection
Title Page Knob
Shipping Screws (2)
One on each side of Title Rack
View from the inside
of the Title Rack Plate