Section 2: Installation & Programming
21822666 2-7
SETTING TITLE PAGE LIMITS FOR THE FIRST TIME
This procedure gives you specific instructions on how to set the page limits only.
The phonograph is shipped with all pages accessible. Pages 1 through 9 can be “flipped” and viewed. When you
install discs, you may not need all 9 pages. If you do not need all 9 pages, you should restrict page movement to
just those pages that have titles. Set the title page limits as follows:
1. Unlock and open the top door.
2. Pull the SERVICE button out to the SERVICE position (refer to Figure 2-4).
3. Make sure that *SERVICE MODE* or _ _ ERRORS EXIST _ _ appears on the display.
4. Type 2 to select the ATTRACT submenu then type 4 to select the PAGE LIMIT function and you will see
the display for entering the first page number to use and the last number to use. Press POPULAR, which sets
the first page number to 1. Notice that the blinking number has moved to the right. Type the last page number
to be used and press POPULAR. Flip the keyboard display back up, making sure that both catches are
engaged.
PRICING
The prices charged for CD selections may be changed as needed. When shipped from the factory, the prices are
set as follows:
Figure 2-6A. Price Card
NOTE:
1. The initialization process will stop whenever the phonograph is in the SERVICE mode,
and will resume when the phonograph is returned to the NORMAL mode if the
phonograph is in Standby (i.e., no selections are in memory).
2. During full initialization, all disc limits are initially set to 99. As each disc is scanned,
the proper limits for that disc are stored in memory allowing only valid selections to
be made.
NOTE:
If you are using the factory pricing, skip to Sound System Set Up.
PRICING:
plays for:
plays for:
plays for:
PRICING: